dmesg - eVGA NVIDIA GeForce RTX 2070 SUPER
Linux version 5.3.0-52-generic (buildd@lcy01-amd64-009) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #46-Ubuntu SMP Wed Apr 29 20:35:46 UTC 2020 (Ubuntu 5.3.0-52.46-generic 5.3.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable
BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20c000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000db576fff] usable
BIOS-e820: [mem 0x00000000db577000-0x00000000db75dfff] reserved
BIOS-e820: [mem 0x00000000db75e000-0x00000000dbbe3fff] usable
BIOS-e820: [mem 0x00000000dbbe4000-0x00000000dbd07fff] ACPI NVS
BIOS-e820: [mem 0x00000000dbd08000-0x00000000dcb42fff] reserved
BIOS-e820: [mem 0x00000000dcb43000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081f2fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xd7296018-0xd72a7057] usable ==> usable
e820: update [mem 0xd7296018-0xd72a7057] usable ==> usable
e820: update [mem 0xd722e018-0xd724de57] usable ==> usable
e820: update [mem 0xd722e018-0xd724de57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009e01fff] usable
reserve setup_data: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
reserve setup_data: [mem 0x000000000a20c000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x00000000d722e017] usable
reserve setup_data: [mem 0x00000000d722e018-0x00000000d724de57] usable
reserve setup_data: [mem 0x00000000d724de58-0x00000000d7296017] usable
reserve setup_data: [mem 0x00000000d7296018-0x00000000d72a7057] usable
reserve setup_data: [mem 0x00000000d72a7058-0x00000000db576fff] usable
reserve setup_data: [mem 0x00000000db577000-0x00000000db75dfff] reserved
reserve setup_data: [mem 0x00000000db75e000-0x00000000dbbe3fff] usable
reserve setup_data: [mem 0x00000000dbbe4000-0x00000000dbd07fff] ACPI NVS
reserve setup_data: [mem 0x00000000dbd08000-0x00000000dcb42fff] reserved
reserve setup_data: [mem 0x00000000dcb43000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000081f2fffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0xdbc85000 ACPI=0xdbc85000 SMBIOS=0xdc99c000 SMBIOS 3.0=0xdc99b000 MEMATTR=0xd7c27018 ESRT=0xda03f618
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: Gigabyte Technology Co., Ltd. B450 I AORUS PRO WIFI/B450 I AORUS PRO WIFI-CF, BIOS F50 11/27/2019
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x81f300 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DC160000 mask FFFFFFFF0000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000820000000 aka 33280M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 3583M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
e820: update [mem 0xdc160000-0xdc16ffff] usable ==> reserved
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000da03f618 to 0x00000000da03f650.
e820: update [mem 0xda03f000-0xda03ffff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x5f5e01000, 0x5f5e01fff] PGTABLE
BRK [0x5f5e02000, 0x5f5e02fff] PGTABLE
BRK [0x5f5e03000, 0x5f5e03fff] PGTABLE
BRK [0x5f5e04000, 0x5f5e04fff] PGTABLE
BRK [0x5f5e05000, 0x5f5e05fff] PGTABLE
BRK [0x5f5e06000, 0x5f5e06fff] PGTABLE
BRK [0x5f5e07000, 0x5f5e07fff] PGTABLE
BRK [0x5f5e08000, 0x5f5e08fff] PGTABLE
BRK [0x5f5e09000, 0x5f5e09fff] PGTABLE
BRK [0x5f5e0a000, 0x5f5e0afff] PGTABLE
BRK [0x5f5e0b000, 0x5f5e0bfff] PGTABLE
BRK [0x5f5e0c000, 0x5f5e0cfff] PGTABLE
RAMDISK: [mem 0x37915000-0x3d492fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBC85000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBC850A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DBC8C098 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DBC85200 006E94 (v02 ALASKA A M I 01072009 INTL 20160930)
ACPI: FACS 0x00000000DBCF1E00 000040
ACPI: APIC 0x00000000DBC8C1B0 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DBC8C310 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DBC8C358 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBC8C3F8 000164 (v02 ALASKA A M I 01072009 AMI 01072009)
ACPI: SSDT 0x00000000DBC8C560 008C98 (v02 ALASKA A M I 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBC951F8 00374D (v01 ALASKA A M I 00000001 INTL 20160930)
ACPI: MCFG 0x00000000DBC98948 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DBC98988 006914 (v01 ALASKA A M I 00000001 INTL 20160930)
ACPI: HPET 0x00000000DBC9F2A0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: UEFI 0x00000000DBC9F2D8 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: BGRT 0x00000000DBC9F320 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DBC9F358 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000)
ACPI: PCCT 0x00000000DBC9F428 00006E (v01 ALASKA A M I 00000001 AMD 00000000)
ACPI: CRAT 0x00000000DBC9F498 001658 (v01 ALASKA A M I 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DBCA0AF0 000029 (v01 ALASKA A M I 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DBCA0B20 001EC3 (v01 ALASKA A M I 00000001 INTL 20160930)
ACPI: SSDT 0x00000000DBCA29E8 0000BF (v01 ALASKA A M I 00001000 INTL 20160930)
ACPI: WSMT 0x00000000DBCA2AA8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBCA2AD0 0013F0 (v01 ALASKA A M I 00000001 INTL 20160930)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081f2fffff]
NODE_DATA(0) allocated [mem 0x81f2d5000-0x81f2fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000081f2fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009e01fff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20c000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000db576fff]
node 0: [mem 0x00000000db75e000-0x00000000dbbe3fff]
node 0: [mem 0x00000000dcb43000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000081f2fffff]
Zeroed struct page in unavailable ranges: 12497 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000081f2fffff]
On node 0 totalpages: 8376111
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14131 pages used for memmap
DMA32 zone: 904336 pages, LIFO batch:63
Normal zone: 116684 pages used for memmap
Normal zone: 7467776 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 25, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 26, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xd7ade000-0xd7b34fff] usable ==> reserved
smpboot: Allowing 32 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09e02000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0xd722e000-0xd722efff]
PM: Registered nosave memory: [mem 0xd724d000-0xd724dfff]
PM: Registered nosave memory: [mem 0xd7296000-0xd7296fff]
PM: Registered nosave memory: [mem 0xd72a7000-0xd72a7fff]
PM: Registered nosave memory: [mem 0xd7ade000-0xd7b34fff]
PM: Registered nosave memory: [mem 0xda03f000-0xda03ffff]
PM: Registered nosave memory: [mem 0xdb577000-0xdb75dfff]
PM: Registered nosave memory: [mem 0xdbbe4000-0xdbd07fff]
PM: Registered nosave memory: [mem 0xdbd08000-0xdcb42fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 8245206
Policy zone: Normal
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32662740K/33504444K available (14339K kernel code, 2387K rwdata, 4728K rodata, 2676K init, 5044K bss, 841704K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 43610 entries in 171 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3792.845 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d57e131670, max_idle_ns: 881590589856 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7585.69 BogoMIPS (lpj=15171380)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Ryzen 9 3900X 12-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
smp: Brought up 1 node, 24 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 24 processors activated (182056.56 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xdbbe4000-0xdbd07fff] (1196032 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 23:51:43, date: 2020-05-03
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1588549902.196:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:1483] type 01 class 0x060400
pci 0000:00:01.3: enabling Extended Tags
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xf7a00000-0xf7a03fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:02:00.0: [1022:43d5] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xf77a0000-0xf77a7fff 64bit]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601
pci 0000:02:00.1: reg 0x24: [mem 0xf7780000-0xf779ffff]
pci 0000:02:00.1: reg 0x30: [mem 0xf7700000-0xf777ffff pref]
pci 0000:02:00.1: enabling Extended Tags
pci 0000:02:00.1: PME# supported from D3hot D3cold
pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400
pci 0000:02:00.2: enabling Extended Tags
pci 0000:02:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 02-09]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:01.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:01.0: enabling Extended Tags
pci 0000:03:01.0: PME# supported from D3hot D3cold
pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:04.0: enabling Extended Tags
pci 0000:03:04.0: PME# supported from D3hot D3cold
pci 0000:03:05.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:05.0: enabling Extended Tags
pci 0000:03:05.0: PME# supported from D3hot D3cold
pci 0000:03:06.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:06.0: enabling Extended Tags
pci 0000:03:06.0: PME# supported from D3hot D3cold
pci 0000:03:07.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:07.0: enabling Extended Tags
pci 0000:03:07.0: PME# supported from D3hot D3cold
pci 0000:02:00.2: PCI bridge to [bus 03-09]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:04.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [8086:2526] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [mem 0xf7600000-0xf7603fff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:05.0: PCI bridge to [bus 07]
pci 0000:03:05.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:03:06.0: PCI bridge to [bus 08]
pci 0000:09:00.0: [8086:1539] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [mem 0xf7500000-0xf751ffff]
pci 0000:09:00.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:09:00.0: reg 0x1c: [mem 0xf7520000-0xf7523fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:07.0: PCI bridge to [bus 09]
pci 0000:03:07.0: bridge window [io 0xf000-0xffff]
pci 0000:03:07.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:0a:00.0: [10de:1e84] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:0a:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:0a:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:0a:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:0a:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:0a:00.0: BAR 1: assigned to efifb
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:0a:00.1: [10de:10f8] type 00 class 0x040300
pci 0000:0a:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:0a:00.2: [10de:1ad8] type 00 class 0x0c0330
pci 0000:0a:00.2: reg 0x10: [mem 0xf2000000-0xf203ffff 64bit pref]
pci 0000:0a:00.2: reg 0x1c: [mem 0xf2040000-0xf204ffff 64bit pref]
pci 0000:0a:00.2: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.3: [10de:1ad9] type 00 class 0x0c8000
pci 0000:0a:00.3: reg 0x10: [mem 0xf7084000-0xf7084fff]
pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
pci 0000:0b:00.0: [1022:148a] type 00 class 0x130000
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:0c:00.0: [1022:1485] type 00 class 0x130000
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.1: [1022:1486] type 00 class 0x108000
pci 0000:0c:00.1: reg 0x18: [mem 0xf7300000-0xf73fffff]
pci 0000:0c:00.1: reg 0x24: [mem 0xf7408000-0xf7409fff]
pci 0000:0c:00.1: enabling Extended Tags
pci 0000:0c:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:0c:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
pci 0000:0c:00.3: enabling Extended Tags
pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.4: [1022:1487] type 00 class 0x040300
pci 0000:0c:00.4: reg 0x10: [mem 0xf7400000-0xf7407fff]
pci 0000:0c:00.4: enabling Extended Tags
pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0d:00.0: reg 0x24: [mem 0xf7900000-0xf79007ff]
pci 0000:0d:00.0: enabling Extended Tags
pci 0000:0d:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 0d]
pci 0000:00:08.2: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:0e:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0e:00.0: reg 0x24: [mem 0xf7800000-0xf78007ff]
pci 0000:0e:00.0: enabling Extended Tags
pci 0000:0e:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus 0e]
pci 0000:00:08.3: bridge window [mem 0xf7800000-0xf78fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:0a:00.0: vgaarb: bridge control possible
pci 0000:0a:00.0: vgaarb: setting as boot device
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd722e018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd7296018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd7ade000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xda03f000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb577000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbbe4000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f300000-0x81fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:04.0: PCI bridge to [bus 06]
pci 0000:03:05.0: PCI bridge to [bus 07]
pci 0000:03:05.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:03:06.0: PCI bridge to [bus 08]
pci 0000:03:07.0: PCI bridge to [bus 09]
pci 0000:03:07.0: bridge window [io 0xf000-0xffff]
pci 0000:03:07.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:02:00.2: PCI bridge to [bus 03-09]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:00:01.3: PCI bridge to [bus 02-09]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:00:08.2: PCI bridge to [bus 0d]
pci 0000:00:08.2: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:00:08.3: PCI bridge to [bus 0e]
pci 0000:00:08.3: bridge window [mem 0xf7800000-0xf78fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xf7500000-0xf77fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf76fffff]
pci_bus 0000:07: resource 1 [mem 0xf7600000-0xf76fffff]
pci_bus 0000:09: resource 0 [io 0xf000-0xffff]
pci_bus 0000:09: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf20fffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xf7200000-0xf74fffff]
pci_bus 0000:0d: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:0e: resource 1 [mem 0xf7800000-0xf78fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
pci 0000:0a:00.2: D0 power state depends on 0000:0a:00.0
pci 0000:0a:00.3: D0 power state depends on 0000:0a:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 93688K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.1: Adding to iommu group 0
pci 0000:00:01.3: Adding to iommu group 0
pci 0000:00:02.0: Adding to iommu group 1
pci 0000:00:03.0: Adding to iommu group 2
pci 0000:00:03.1: Adding to iommu group 2
pci 0000:00:04.0: Adding to iommu group 3
pci 0000:00:05.0: Adding to iommu group 4
pci 0000:00:07.0: Adding to iommu group 5
pci 0000:00:07.1: Adding to iommu group 6
pci 0000:00:08.0: Adding to iommu group 7
pci 0000:00:08.1: Adding to iommu group 8
pci 0000:00:08.2: Adding to iommu group 9
pci 0000:00:08.3: Adding to iommu group 10
pci 0000:00:14.0: Adding to iommu group 11
pci 0000:00:14.3: Adding to iommu group 11
pci 0000:00:18.0: Adding to iommu group 12
pci 0000:00:18.1: Adding to iommu group 12
pci 0000:00:18.2: Adding to iommu group 12
pci 0000:00:18.3: Adding to iommu group 12
pci 0000:00:18.4: Adding to iommu group 12
pci 0000:00:18.5: Adding to iommu group 12
pci 0000:00:18.6: Adding to iommu group 12
pci 0000:00:18.7: Adding to iommu group 12
pci 0000:01:00.0: Adding to iommu group 0
pci 0000:02:00.0: Adding to iommu group 0
pci 0000:02:00.1: Adding to iommu group 0
pci 0000:02:00.2: Adding to iommu group 0
pci 0000:03:00.0: Adding to iommu group 0
pci 0000:03:01.0: Adding to iommu group 0
pci 0000:03:04.0: Adding to iommu group 0
pci 0000:03:05.0: Adding to iommu group 0
pci 0000:03:06.0: Adding to iommu group 0
pci 0000:03:07.0: Adding to iommu group 0
pci 0000:07:00.0: Adding to iommu group 0
pci 0000:09:00.0: Adding to iommu group 0
pci 0000:0a:00.0: Adding to iommu group 2
pci 0000:0a:00.1: Adding to iommu group 2
pci 0000:0a:00.2: Adding to iommu group 2
pci 0000:0a:00.3: Adding to iommu group 2
pci 0000:0b:00.0: Adding to iommu group 13
pci 0000:0c:00.0: Adding to iommu group 14
pci 0000:0c:00.1: Adding to iommu group 15
pci 0000:0c:00.3: Adding to iommu group 16
pci 0000:0c:00.4: Adding to iommu group 17
pci 0000:0d:00.0: Adding to iommu group 18
pci 0000:0e:00.0: Adding to iommu group 19
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: X2APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.1: PME: Signaling with IRQ 26
pcieport 0000:00:01.3: PME: Signaling with IRQ 27
pcieport 0000:00:03.1: PME: Signaling with IRQ 28
pcieport 0000:00:07.1: PME: Signaling with IRQ 30
pcieport 0000:00:07.1: AER: enabled with IRQ 30
pcieport 0000:00:08.1: PME: Signaling with IRQ 31
pcieport 0000:00:08.1: AER: enabled with IRQ 31
pcieport 0000:00:08.2: PME: Signaling with IRQ 32
pcieport 0000:00:08.2: AER: enabled with IRQ 32
pcieport 0000:00:08.3: PME: Signaling with IRQ 33
pcieport 0000:00:08.3: AER: enabled with IRQ 33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-52-generic xhci-hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-52-generic xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:0a:00.2: xHCI Host Controller
xhci_hcd 0000:0a:00.2: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0a:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.3.0-52-generic xhci-hcd
usb usb3: SerialNumber: 0000:0a:00.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.2: xHCI Host Controller
xhci_hcd 0000:0a:00.2: new USB bus registered, assigned bus number 4
xhci_hcd 0000:0a:00.2: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.3.0-52-generic xhci-hcd
usb usb4: SerialNumber: 0000:0a:00.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0c:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.3.0-52-generic xhci-hcd
usb usb5: SerialNumber: 0000:0c:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.3.0-52-generic xhci-hcd
usb usb6: SerialNumber: 0000:0c:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08701013
microcode: CPU1: patch_level=0x08701013
microcode: CPU2: patch_level=0x08701013
microcode: CPU3: patch_level=0x08701013
microcode: CPU4: patch_level=0x08701013
microcode: CPU5: patch_level=0x08701013
microcode: CPU6: patch_level=0x08701013
microcode: CPU7: patch_level=0x08701013
microcode: CPU8: patch_level=0x08701013
microcode: CPU9: patch_level=0x08701013
microcode: CPU10: patch_level=0x08701013
microcode: CPU11: patch_level=0x08701013
microcode: CPU12: patch_level=0x08701013
microcode: CPU13: patch_level=0x08701013
microcode: CPU14: patch_level=0x08701013
microcode: CPU15: patch_level=0x08701013
microcode: CPU16: patch_level=0x08701013
microcode: CPU17: patch_level=0x08701013
microcode: CPU18: patch_level=0x08701013
microcode: CPU19: patch_level=0x08701013
microcode: CPU20: patch_level=0x08701013
microcode: CPU21: patch_level=0x08701013
microcode: CPU22: patch_level=0x08701013
microcode: CPU23: patch_level=0x08701013
microcode: Microcode Update Driver: v2.2.
*** VALIDATE rdt ***
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
sched_clock: Marking stable (458584300, -27996724)->(431898619, -1311043)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 2aeaba8bd90deda59dc9efa9ed500bf4ce4a57cb'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:0:908
mem port: hash matches
rtc_cmos 00:02: setting system clock to 2020-05-03T23:51:43 UTC (1588549903)
powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2676K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1416K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
fbcon: Taking over console
Console: switching to colour frame buffer device 128x48
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
ahci 0000:02:00.1: version 3.0
ahci 0000:02:00.1: enabling device (0000 -> 0002)
ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
dca service started, version 1.12.1
nvidia-gpu 0000:0a:00.3: enabling device (0000 -> 0002)
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
IPMI message handler: version 39.2
scsi host7: ahci
nvme nvme0: pci function 0000:01:00.0
ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 55
ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 55
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 55
ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 55
ata7: DUMMY
ata8: DUMMY
ahci 0000:0d:00.0: enabling device (0000 -> 0002)
ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
ipmi device interface
scsi host8: ahci
ata9: SATA max UDMA/133 abar m2048@0xf7900000 port 0xf7900100 irq 61
ahci 0000:0e:00.0: enabling device (0000 -> 0002)
ahci 0000:0e:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0e:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20190703/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
scsi host9: ahci
ata10: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800100 irq 63
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
pps pps0: new PPS source ptp0
igb 0000:09:00.0: added PHC on eth0
igb 0000:09:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:09:00.0: eth0: (PCIe:2.5Gb/s:Width x1) b4:2e:99:a4:82:46
igb 0000:09:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:09:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
nvidia: module verification failed: signature and/or required key missing - tainting kernel
igb 0000:09:00.0 enp9s0: renamed from eth0
nvidia-nvlink: Nvlink Core is being initialized, major device number 238
nvidia 0000:0a:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.82 Wed Apr 1 20:04:33 UTC 2020
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.82 Wed Apr 1 19:41:29 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00000a00] Loading driver
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
usb 1-5: new full-speed USB device number 2 using xhci_hcd
nvme nvme0: 32/0/0 default/read/poll queues
usb 5-1: new high-speed USB device number 2 using xhci_hcd
nvme0n1: p1 p2 p3
usb 5-1: New USB device found, idVendor=0424, idProduct=2734, bcdDevice= 1.30
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB2734
usb 5-1: Manufacturer: Microchip Tech
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 5 ports detected
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
usb 6-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 6-2: New USB device found, idVendor=0bc2, idProduct=331a, bcdDevice= 9.15
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2: Product: Expansion Desk
usb 6-2: Manufacturer: Seagate
usb 6-2: SerialNumber: NAAB19PZ
usbcore: registered new interface driver usb-storage
scsi host10: uas
usbcore: registered new interface driver uas
scsi 10:0:0:0: Direct-Access Seagate Expansion Desk 0915 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg0 type 0
sd 10:0:0:0: [sda] 15628053167 512-byte logical blocks: (8.00 TB/7.28 TiB)
sd 10:0:0:0: [sda] 4096-byte physical blocks
sd 10:0:0:0: [sda] Write Protect is off
sd 10:0:0:0: [sda] Mode Sense: 53 00 00 08
sd 10:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 10:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
sda: sda1
sd 10:0:0:0: [sda] Attached SCSI disk
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: ST5000LM000-2AN170, 0001, max UDMA/133
ata1.00: 9767541168 sectors, multi 0: LBA48 NCQ (depth 32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST5000LM000-2AN1 0001 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sdb] 9767541168 512-byte logical blocks: (5.00 TB/4.55 TiB)
sd 0:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-5: New USB device found, idVendor=1209, idProduct=1776, bcdDevice= 0.01
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=220
usb 1-5: Product: Io
usb 1-5: Manufacturer: System76
usb 1-5: SerialNumber: 85831323831351C021D1
system76-io 1-5:1.0: id 1209:1776 interface 0 probe
system76-io 1-5:1.1: id 1209:1776 interface 1 probe
system76-io 1-5:1.1: trying reset: 0
usbcore: registered new interface driver system76-io
usb 5-4: new full-speed USB device number 3 using xhci_hcd
usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=1058, idProduct=25e2, bcdDevice=40.05
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: My Passport 25E2
usb 2-1: Manufacturer: Western Digital
usb 2-1: SerialNumber: 57583431444338394B39374B
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host11: usb-storage 2-1:1.0
usb 5-4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: USB Receiver
usb 5-4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usb 1-10: new full-speed USB device number 3 using xhci_hcd
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.0/0003:046D:C52B.0001/input/input2
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0c:00.3-4/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.1/0003:046D:C52B.0002/input/input3
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.1/0003:046D:C52B.0002/input/input4
tsc: Refined TSC clocksource calibration: 3792.873 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5818a734c, max_idle_ns: 881590694765 ns
clocksource: Switched to clocksource tsc
sdb: sdb1
sd 0:0:0:0: [sdb] supports TCG Opal
sd 0:0:0:0: [sdb] Attached SCSI disk
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.1/0003:046D:C52B.0002/input/input5
hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0c:00.3-4/input1
hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0c:00.3-4/input2
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: ATA-10: ST5000LM000-2AN170, 0001, max UDMA/133
ata2.00: 9767541168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0a:00.0 on minor 0
usb 5-1.1: new high-speed USB device number 4 using xhci_hcd
usb 1-10: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-1.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21
usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.1: Product: 4-Port USB 2.0 Hub
usb 5-1.1: Manufacturer: Generic
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0c:00.3-4/input2
hub 5-1.1:1.0: USB hub found
hub 5-1.1:1.0: 4 ports detected
ata2.00: supports DRM functions and may not be fully accessible
input: Logitech Unifying Device. Wireless PID:4082 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.2/0003:046D:C52B.0003/0003:046D:4082.0004/input/input7
input: Logitech Unifying Device. Wireless PID:4082 Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.2/0003:046D:C52B.0003/0003:046D:4082.0004/input/input8
hid-generic 0003:046D:4082.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4082] on usb-0000:0c:00.3-4/input2:1
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST5000LM000-2AN1 0001 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdc] 9767541168 512-byte logical blocks: (5.00 TB/4.55 TiB)
sd 1:0:0:0: [sdc] 4096-byte physical blocks
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 5-1.3: new full-speed USB device number 5 using xhci_hcd
sdc: sdc1
sd 1:0:0:0: [sdc] supports TCG Opal
sd 1:0:0:0: [sdc] Attached SCSI disk
input: Logitech MX Master 3 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.2/0003:046D:C52B.0003/0003:046D:4082.0004/input/input12
logitech-hidpp-device 0003:046D:4082.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Master 3] on usb-0000:0c:00.3-4/input2:1
usb 5-1.3: New USB device found, idVendor=24f0, idProduct=202b, bcdDevice= 0.26
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.3: Product: X50 RGB Mechanical Keyboard
usb 5-1.3: Manufacturer: Das Keyboard
usb 5-1.1.1: new high-speed USB device number 6 using xhci_hcd
input: Das Keyboard X50 RGB Mechanical Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-1/5-1.3/5-1.3:1.0/0003:24F0:202B.0005/input/input13
usb 5-1.1.1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
usb 5-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.1.1: Product: Flash Drive FIT
usb 5-1.1.1: Manufacturer: Samsung
usb 5-1.1.1: SerialNumber: 0330219080018743
usb-storage 5-1.1.1:1.0: USB Mass Storage device detected
usb-storage 5-1.1.1:1.0: Quirks match for vid 090c pid 1000: 400
scsi host12: usb-storage 5-1.1.1:1.0
hid-generic 0003:24F0:202B.0005: input,hidraw2: USB HID v1.11 Keyboard [Das Keyboard X50 RGB Mechanical Keyboard] on usb-0000:0c:00.3-1.3/input0
input: Das Keyboard X50 RGB Mechanical Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-1/5-1.3/5-1.3:1.1/0003:24F0:202B.0006/input/input14
input: Das Keyboard X50 RGB Mechanical Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-1/5-1.3/5-1.3:1.1/0003:24F0:202B.0006/input/input15
input: Das Keyboard X50 RGB Mechanical Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-1/5-1.3/5-1.3:1.1/0003:24F0:202B.0006/input/input16
input: Das Keyboard X50 RGB Mechanical Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-1/5-1.3/5-1.3:1.1/0003:24F0:202B.0006/input/input18
hid-generic 0003:24F0:202B.0006: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Das Keyboard X50 RGB Mechanical Keyboard] on usb-0000:0c:00.3-1.3/input1
hid-generic 0003:24F0:202B.0007: hiddev2,hidraw4: USB HID v1.11 Device [Das Keyboard X50 RGB Mechanical Keyboard] on usb-0000:0c:00.3-1.3/input2
scsi 11:0:0:0: Direct-Access WD My Passport 25E2 4005 PQ: 0 ANSI: 6
scsi 11:0:0:1: Enclosure WD SES Device 4005 PQ: 0 ANSI: 6
sd 11:0:0:0: Attached scsi generic sg3 type 0
sd 11:0:0:1: Attached scsi generic sg4 type 13
sd 11:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
sd 11:0:0:0: [sdd] 7813969920 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 11:0:0:0: [sdd] 4096-byte physical blocks
sd 11:0:0:0: [sdd] Write Protect is off
sd 11:0:0:0: [sdd] Mode Sense: 47 00 10 08
sd 11:0:0:0: [sdd] No Caching mode page found
sd 11:0:0:0: [sdd] Assuming drive cache: write through
scsi 11:0:0:1: Wrong diagnostic page; asked for 1 got 8
scsi 11:0:0:1: Failed to get diagnostic page 0x1
scsi 11:0:0:1: Failed to bind enclosure -19
sdd: sdd1
sd 11:0:0:0: [sdd] Attached SCSI disk
ses 11:0:0:1: Attached Enclosure device
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 5-1.5: new high-speed USB device number 7 using xhci_hcd
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: ATA-10: ST5000LM000-2AN170, 0001, max UDMA/133
ata5.00: 9767541168 sectors, multi 0: LBA48 NCQ (depth 32), AA
usb 5-1.5: New USB device found, idVendor=0424, idProduct=274c, bcdDevice= 2.00
usb 5-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.5: Product: Hub Controller
usb 5-1.5: Manufacturer: Microchip Tech
hid-generic 0003:0424:274C.0008: hiddev3,hidraw5: USB HID v1.10 Device [Microchip Tech Hub Controller] on usb-0000:0c:00.3-1.5/input0
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST5000LM000-2AN1 0001 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 9767541168 512-byte logical blocks: (5.00 TB/4.55 TiB)
sd 4:0:0:0: Attached scsi generic sg5 type 0
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 4:0:0:0: [sde] supports TCG Opal
sd 4:0:0:0: [sde] Attached SCSI disk
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: ATA-10: ST5000LM000-2AN170, 0001, max UDMA/133
ata6.00: 9767541168 sectors, multi 0: LBA48 NCQ (depth 32), AA
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: configured for UDMA/133
scsi: waiting for bus probes to complete ...
scsi 12:0:0:0: Direct-Access Samsung Flash Drive FIT 1100 PQ: 0 ANSI: 6
sd 12:0:0:0: Attached scsi generic sg6 type 0
scsi 5:0:0:0: Direct-Access ATA ST5000LM000-2AN1 0001 PQ: 0 ANSI: 5
sd 12:0:0:0: [sdf] 501253132 512-byte logical blocks: (257 GB/239 GiB)
sd 5:0:0:0: Attached scsi generic sg7 type 0
sd 12:0:0:0: [sdf] Write Protect is off
sd 12:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdg] 9767541168 512-byte logical blocks: (5.00 TB/4.55 TiB)
sd 5:0:0:0: [sdg] 4096-byte physical blocks
sd 5:0:0:0: [sdg] Write Protect is off
sd 5:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 12:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1
sd 5:0:0:0: [sdg] supports TCG Opal
sd 5:0:0:0: [sdg] Attached SCSI disk
sdf: sdf1
sd 12:0:0:0: [sdf] Attached SCSI removable disk
system76: Model does not utilize this driver
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on Journal Socket.
lp: driver loaded but no devices found
EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro,discard
ppdev: user-space parallel port driver
Adding 1484328k swap on /swapfile. Priority:-2 extents:5 across:1517096k SSFS
nvidia-uvm: Loaded the UVM driver, major device number 235.
ccp 0000:0c:00.1: enabling device (0000 -> 0002)
ccp 0000:0c:00.1: ccp enabled
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:07:00.0: enabling device (0000 -> 0002)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
usbcore: registered new interface driver rndis_wlan
usbcore: registered new interface driver btusb
MCE: In-kernel MCE decoding enabled.
iwlwifi 0000:07:00.0: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:07:00.0: Found debug configuration: 0
iwlwifi 0000:07:00.0: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: hci0: Firmware revision 0.1 build 26 week 11 2020
iwlwifi 0000:07:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:07:00.0: Allocated 0x00400000 bytes for firmware monitor.
snd_hda_intel 0000:0a:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:0a:00.1: Disabling MSI
snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0c:00.4: enabling device (0000 -> 0002)
systemd-journald[621]: Received request to flush runtime journal from PID 1
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard
iwlwifi 0000:07:00.0: base HW address: 7c:b2:7d:2e:57:3e
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone0: failed to read out thermal zone (-61)
iwlwifi 0000:07:00.0 wlp7s0: renamed from wlan0
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input19
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input20
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input21
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input22
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input23
EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1588549910.442:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1728 comm="apparmor_parser"
audit: type=1400 audit(1588549910.442:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1734 comm="apparmor_parser"
audit: type=1400 audit(1588549910.446:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1731 comm="apparmor_parser"
audit: type=1400 audit(1588549910.446:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1731 comm="apparmor_parser"
audit: type=1400 audit(1588549910.446:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1736 comm="apparmor_parser"
audit: type=1400 audit(1588549910.446:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1736 comm="apparmor_parser"
audit: type=1400 audit(1588549910.446:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1732 comm="apparmor_parser"
audit: type=1400 audit(1588549910.446:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1732 comm="apparmor_parser"
audit: type=1400 audit(1588549910.446:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1732 comm="apparmor_parser"
audit: type=1400 audit(1588549910.446:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1727 comm="apparmor_parser"
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 30
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input24
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input25
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input26
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input27
iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:07:00.0: FW already configured (0) - re-configuring
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 49
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
igb 0000:09:00.0 enp9s0: igb: enp9s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
igb 0000:09:00.0 enp9s0: igb: enp9s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
bpfilter: Loaded bpfilter_umh pid 4409
Started bpfilter
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
logitech-hidpp-device 0003:046D:4082.0004: HID++ 4.5 device connected.
wlp7s0: authenticate with 60:e3:27:48:30:f4
wlp7s0: send auth to 60:e3:27:48:30:f4 (try 1/3)
wlp7s0: authenticated
wlp7s0: associate with 60:e3:27:48:30:f4 (try 1/3)
wlp7s0: RX AssocResp from 60:e3:27:48:30:f4 (capab=0x411 status=0 aid=3)
wlp7s0: associated
wlp7s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 60:e3:27:48:30:f4
IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
wlp7s0: deauthenticating from 60:e3:27:48:30:f4 by local choice (Reason: 3=DEAUTH_LEAVING)
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
TCP: request_sock_TCP: Possible SYN flooding on port 60201. Sending cookies. Check SNMP counters.
sd 11:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 11:0:0:0: [sdd] tag#0 Sense Key : Illegal Request [current]
sd 11:0:0:0: [sdd] tag#0 Add. Sense: Invalid command operation code
sd 11:0:0:0: [sdd] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 01 37 a0 00 00 00 20 00 00
blk_update_request: critical target error, dev sdd, sector 79776 op 0x3:(DISCARD) flags 0x800 phys_seg 1 prio class 0
INFO: task qbittorrent:27833 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 27833 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
? fsnotify+0x30c/0x3d0
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? fput+0x13/0x15
? __x64_sys_epoll_ctl+0xe7/0x840
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: 3c 24 48 89 4c 24 18 e8 16 00 f8 ff 4c 8b 54 24 18 8b 3c 24 45 31 c0 41 89 c1 8b 54 24 14 48 8b 74 24 08 b8 28 01 00 00 0f 05 3d 00 f0 ff ff 77 2c 44 89 cf 48 89 04 24 e8 44 00 f8 ff 48 8b
RSP: 002b:00007f1eeb8c0560 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1eeb8c0590 RCX: 00007f1f30f45908
RDX: 00000000000000c8 RSI: 00007f1eeb8c0590 RDI: 000000000000005d
RBP: 00007f1eeb8c1280 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000876f9319 R11: 0000000000000246 R12: 00000000876f9319
R13: 00007f1eeb8c1338 R14: 00007f1f30f458a0 R15: 0000000000000000
INFO: task qbittorrent:23669 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 23669 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
? fsnotify+0x30c/0x3d0
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? fput+0x13/0x15
? __x64_sys_epoll_ctl+0xe7/0x840
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: 3c 24 48 89 4c 24 18 e8 16 00 f8 ff 4c 8b 54 24 18 8b 3c 24 45 31 c0 41 89 c1 8b 54 24 14 48 8b 74 24 08 b8 28 01 00 00 0f 05 3d 00 f0 ff ff 77 2c 44 89 cf 48 89 04 24 e8 44 00 f8 ff 48 8b
RSP: 002b:00007f1eec0bdae0 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1eec0bdb10 RCX: 00007f1f30f45908
RDX: 0000000000000200 RSI: 00007f1eec0bdb10 RDI: 000000000000005d
RBP: 00007f1eec0bfb80 R08: 0000000000000000 R09: 0000000000000000
R10: 000000008f219319 R11: 0000000000000246 R12: 000000008f219319
R13: 00007f1eec0bfc38 R14: 00007f1f30f458a0 R15: 0000000000000000
INFO: task qbittorrent:27824 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 27824 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? futex_wake+0x8b/0x180
? do_futex+0x160/0x1e0
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: 3c 24 48 89 4c 24 18 e8 16 00 f8 ff 4c 8b 54 24 18 8b 3c 24 45 31 c0 41 89 c1 8b 54 24 14 48 8b 74 24 08 b8 28 01 00 00 0f 05 3d 00 f0 ff ff 77 2c 44 89 cf 48 89 04 24 e8 44 00 f8 ff 48 8b
RSP: 002b:00007f1ef10c7ae0 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1ef10c7b10 RCX: 00007f1f30f45908
RDX: 0000000000000200 RSI: 00007f1ef10c7b10 RDI: 000000000000005d
RBP: 00007f1ef10c9b80 R08: 0000000000000000 R09: 0000000000000000
R10: 000000008da19319 R11: 0000000000000246 R12: 000000008da19319
R13: 00007f1ef10c9c38 R14: 00007f1f30f458a0 R15: 0000000000000000
INFO: task qbittorrent:27828 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 27828 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x34/0x70
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
? __switch_to_asm+0x40/0x70
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? futex_wake+0x8b/0x180
? do_futex+0x160/0x1e0
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: 3c 24 48 89 4c 24 18 e8 16 00 f8 ff 4c 8b 54 24 18 8b 3c 24 45 31 c0 41 89 c1 8b 54 24 14 48 8b 74 24 08 b8 28 01 00 00 0f 05 3d 00 f0 ff ff 77 2c 44 89 cf 48 89 04 24 e8 44 00 f8 ff 48 8b
RSP: 002b:00007f1eee0c1ae0 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1eee0c1b10 RCX: 00007f1f30f45908
RDX: 0000000000000200 RSI: 00007f1eee0c1b10 RDI: 000000000000005d
RBP: 00007f1eee0c3b80 R08: 0000000000000000 R09: 0000000000000000
R10: 000000008e219319 R11: 0000000000000246 R12: 000000008e219319
R13: 00007f1eee0c3c38 R14: 00007f1f30f458a0 R15: 0000000000000000
INFO: task qbittorrent:27833 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 27833 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
? fsnotify+0x30c/0x3d0
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? fput+0x13/0x15
? __x64_sys_epoll_ctl+0xe7/0x840
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: 3c 24 48 89 4c 24 18 e8 16 00 f8 ff 4c 8b 54 24 18 8b 3c 24 45 31 c0 41 89 c1 8b 54 24 14 48 8b 74 24 08 b8 28 01 00 00 0f 05 3d 00 f0 ff ff 77 2c 44 89 cf 48 89 04 24 e8 44 00 f8 ff 48 8b
RSP: 002b:00007f1eeb8bcae0 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1eeb8bcb10 RCX: 00007f1f30f45908
RDX: 0000000000000200 RSI: 00007f1eeb8bcb10 RDI: 000000000000005d
RBP: 00007f1eeb8beb80 R08: 0000000000000000 R09: 0000000000000000
R10: 000000008d219319 R11: 0000000000000246 R12: 000000008d219319
R13: 00007f1eeb8bec38 R14: 00007f1f30f458a0 R15: 0000000000000000
INFO: task qbittorrent:25417 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 25417 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
? fsnotify+0x30c/0x3d0
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? fput+0x13/0x15
? __x64_sys_epoll_ctl+0xe7/0x840
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: Bad RIP value.
RSP: 002b:00007f1ef3ff4ae0 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1ef3ff4b10 RCX: 00007f1f30f45908
RDX: 0000000000000200 RSI: 00007f1ef3ff4b10 RDI: 000000000000005d
RBP: 00007f1ef3ff6b80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000091219319 R11: 0000000000000246 R12: 0000000091219319
R13: 00007f1ef3ff6c38 R14: 00007f1f30f458a0 R15: 0000000000000000
INFO: task qbittorrent:26076 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 26076 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
? fsnotify+0x30c/0x3d0
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? fput+0x13/0x15
? __x64_sys_epoll_ctl+0xe7/0x840
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: Bad RIP value.
RSP: 002b:00007f1ec8feeae0 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1ec8feeb10 RCX: 00007f1f30f45908
RDX: 0000000000000200 RSI: 00007f1ec8feeb10 RDI: 000000000000005d
RBP: 00007f1ec8ff0b80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000090a19319 R11: 0000000000000246 R12: 0000000090a19319
R13: 00007f1ec8ff0c38 R14: 00007f1f30f458a0 R15: 0000000000000000
INFO: task qbittorrent:27633 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 27633 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
? fsnotify+0x30c/0x3d0
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? call_rcu+0x10/0x20
? __fput+0x150/0x260
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: Bad RIP value.
RSP: 002b:00007f1eca7f1ae0 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1eca7f1b10 RCX: 00007f1f30f45908
RDX: 0000000000000200 RSI: 00007f1eca7f1b10 RDI: 000000000000005d
RBP: 00007f1eca7f3b80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000090219319 R11: 0000000000000246 R12: 0000000090219319
R13: 00007f1eca7f3c38 R14: 00007f1f30f458a0 R15: 0000000000000000
INFO: task qbittorrent:27819 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 27819 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
? fsnotify+0x30c/0x3d0
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? fput+0x13/0x15
? __x64_sys_epoll_ctl+0xe7/0x840
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: Bad RIP value.
RSP: 002b:00007f1ef2ff2ae0 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1ef2ff2b10 RCX: 00007f1f30f45908
RDX: 0000000000000200 RSI: 00007f1ef2ff2b10 RDI: 000000000000005d
RBP: 00007f1ef2ff4b80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000091a19319 R11: 0000000000000246 R12: 0000000091a19319
R13: 00007f1ef2ff4c38 R14: 00007f1f30f458a0 R15: 0000000000000000
INFO: task qbittorrent:27821 blocked for more than 120 seconds.
Tainted: P OE 5.3.0-52-generic #46-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qbittorrent D 0 27821 4580 0x00000000
Call Trace:
__schedule+0x2b9/0x6c0
schedule+0x42/0xb0
rwsem_down_write_slowpath+0x23a/0x4c0
down_write+0x41/0x50
ext4_file_write_iter+0x99/0x3b0
? common_file_perm+0x5e/0x110
do_iter_readv_writev+0x14f/0x1d0
do_iter_write+0x84/0x1a0
vfs_writev+0xa6/0xf0
? handle_mm_fault+0xca/0x1f0
? do_user_addr_fault+0x216/0x450
? __x64_sys_epoll_ctl+0xe7/0x840
do_pwritev+0x93/0xd0
__x64_sys_pwritev+0x21/0x30
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f30f45908
Code: Bad RIP value.
RSP: 002b:00007f1f11f3eae0 EFLAGS: 00000246 ORIG_RAX: 0000000000000128
RAX: ffffffffffffffda RBX: 00007f1f11f3eb10 RCX: 00007f1f30f45908
RDX: 0000000000000200 RSI: 00007f1f11f3eb10 RDI: 000000000000005d
RBP: 00007f1f11f40b80 R08: 0000000000000000 R09: 0000000000000000
R10: 000000008ea19319 R11: 0000000000000246 R12: 000000008ea19319
R13: 00007f1f11f40c38 R14: 00007f1f30f458a0 R15: 0000000000000000
PM: suspend entry (deep)
Filesystems sync: 19.029 seconds
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
system76-io 1-5:1.0: disconnect
system76-io 1-5:1.1: disconnect
sd 10:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sdc] Synchronizing SCSI cache
sd 4:0:0:0: [sde] Synchronizing SCSI cache
sd 12:0:0:0: [sdf] Synchronizing SCSI cache
sd 0:0:0:0: [sdb] Synchronizing SCSI cache
sd 4:0:0:0: [sde] Stopping disk
sd 5:0:0:0: [sdg] Synchronizing SCSI cache
sd 5:0:0:0: [sdg] Stopping disk
sd 1:0:0:0: [sdc] Stopping disk
sd 0:0:0:0: [sdb] Stopping disk
snd_hda_intel 0000:0a:00.1: spurious response 0x0:0x0, last cmd=0x5f2f02
snd_hda_intel 0000:0a:00.1: spurious response 0x0:0x0, last cmd=0x5f2f02
snd_hda_intel 0000:0a:00.1: spurious response 0x40:0x0, last cmd=0x5f2f02
snd_hda_intel 0000:0a:00.1: spurious response 0x0:0x0, last cmd=0x5f2f02
snd_hda_intel 0000:0a:00.1: spurious response 0x0:0x0, last cmd=0x5f2f02
snd_hda_intel 0000:0a:00.1: spurious response 0x40:0x0, last cmd=0x5f2f02
snd_hda_intel 0000:0a:00.1: spurious response 0x0:0x0, last cmd=0x5f2f02
snd_hda_intel 0000:0a:00.1: spurious response 0x0:0x0, last cmd=0x5f2f02
snd_hda_intel 0000:0a:00.1: spurious response 0x0:0x0, last cmd=0x5f2f02
snd_hda_intel 0000:0a:00.1: spurious response 0x0:0x0, last cmd=0x5f2f02
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 2
ACPI: Preparing to enter system sleep state S3
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD buf size -1
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 119: no longer affine to CPU1
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
IRQ 117: no longer affine to CPU4
smpboot: CPU 4 is now offline
IRQ 115: no longer affine to CPU5
smpboot: CPU 5 is now offline
IRQ 108: no longer affine to CPU6
smpboot: CPU 6 is now offline
IRQ 121: no longer affine to CPU7
smpboot: CPU 7 is now offline
IRQ 55: no longer affine to CPU8
smpboot: CPU 8 is now offline
IRQ 114: no longer affine to CPU9
smpboot: CPU 9 is now offline
IRQ 70: no longer affine to CPU10
smpboot: CPU 10 is now offline
IRQ 111: no longer affine to CPU11
smpboot: CPU 11 is now offline
IRQ 120: no longer affine to CPU12
smpboot: CPU 12 is now offline
smpboot: CPU 13 is now offline
smpboot: CPU 14 is now offline
smpboot: CPU 15 is now offline
smpboot: CPU 16 is now offline
smpboot: CPU 17 is now offline
smpboot: CPU 18 is now offline
smpboot: CPU 19 is now offline
smpboot: CPU 20 is now offline
smpboot: CPU 21 is now offline
smpboot: CPU 22 is now offline
smpboot: CPU 23 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1: patch_level=0x08701013
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2: patch_level=0x08701013
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x8
microcode: CPU3: patch_level=0x08701013
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0xa
microcode: CPU4: patch_level=0x08701013
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD buf size -1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0xc
microcode: CPU5: patch_level=0x08701013
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x10
microcode: CPU6: patch_level=0x08701013
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x12
microcode: CPU7: patch_level=0x08701013
CPU7 is up
smpboot: Booting Node 0 Processor 8 APIC 0x14
microcode: CPU8: patch_level=0x08701013
CPU8 is up
smpboot: Booting Node 0 Processor 9 APIC 0x18
microcode: CPU9: patch_level=0x08701013
CPU9 is up
smpboot: Booting Node 0 Processor 10 APIC 0x1a
microcode: CPU10: patch_level=0x08701013
CPU10 is up
smpboot: Booting Node 0 Processor 11 APIC 0x1c
microcode: CPU11: patch_level=0x08701013
CPU11 is up
smpboot: Booting Node 0 Processor 12 APIC 0x1
microcode: CPU12: patch_level=0x08701013
CPU12 is up
smpboot: Booting Node 0 Processor 13 APIC 0x3
microcode: CPU13: patch_level=0x08701013
CPU13 is up
smpboot: Booting Node 0 Processor 14 APIC 0x5
microcode: CPU14: patch_level=0x08701013
CPU14 is up
smpboot: Booting Node 0 Processor 15 APIC 0x9
microcode: CPU15: patch_level=0x08701013
CPU15 is up
smpboot: Booting Node 0 Processor 16 APIC 0xb
microcode: CPU16: patch_level=0x08701013
CPU16 is up
smpboot: Booting Node 0 Processor 17 APIC 0xd
microcode: CPU17: patch_level=0x08701013
CPU17 is up
smpboot: Booting Node 0 Processor 18 APIC 0x11
microcode: CPU18: patch_level=0x08701013
CPU18 is up
smpboot: Booting Node 0 Processor 19 APIC 0x13
microcode: CPU19: patch_level=0x08701013
CPU19 is up
smpboot: Booting Node 0 Processor 20 APIC 0x15
microcode: CPU20: patch_level=0x08701013
CPU20 is up
smpboot: Booting Node 0 Processor 21 APIC 0x19
microcode: CPU21: patch_level=0x08701013
CPU21 is up
smpboot: Booting Node 0 Processor 22 APIC 0x1b
microcode: CPU22: patch_level=0x08701013
CPU22 is up
smpboot: Booting Node 0 Processor 23 APIC 0x1d
microcode: CPU23: patch_level=0x08701013
CPU23 is up
ACPI: Waking up from system sleep state S3
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
sd 1:0:0:0: [sdc] Starting disk
sd 4:0:0:0: [sde] Starting disk
sd 0:0:0:0: [sdb] Starting disk
sd 5:0:0:0: [sdg] Starting disk
iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
nvme nvme0: Shutdown timeout set to 8 seconds
iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
nvme nvme0: 32/0/0 default/read/poll queues
usb 5-1.5: reset high-speed USB device number 7 using xhci_hcd
iwlwifi 0000:07:00.0: FW already configured (0) - re-configuring
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
usb 2-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb 1-10: reset full-speed USB device number 3 using xhci_hcd
usb 1-5: reset full-speed USB device number 2 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
system76-io 1-5:1.0: id 1209:1776 interface 0 probe
done.
system76-io 1-5:1.1: id 1209:1776 interface 1 probe
system76-io 1-5:1.1: trying reset: 0
Bluetooth: hci0: Firmware revision 0.1 build 26 week 11 2020
PM: suspend exit
igb 0000:09:00.0 enp9s0: igb: enp9s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: configured for UDMA/133
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: configured for UDMA/133
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: configured for UDMA/133
iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:07:00.0: FW already configured (0) - re-configuring
igb 0000:09:00.0 enp9s0: igb: enp9s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
igb 0000:09:00.0 enp9s0: igb: enp9s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 32
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
TCP: request_sock_TCP: Possible SYN flooding on port 60201. Sending cookies. Check SNMP counters.
usb 5-1.1.2: new high-speed USB device number 8 using xhci_hcd
usb 5-1.1.2: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice=10.03
usb 5-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.1.2: Product: iPhone
usb 5-1.1.2: Manufacturer: Apple Inc.
usb 5-1.1.2: SerialNumber: 2fb9f9e1c0d51711f02a500da80cdbd819594ace
ipheth 5-1.1.2:4.2: Apple iPhone USB Ethernet device attached
usbcore: registered new interface driver ipheth
TCP: request_sock_TCP: Possible SYN flooding on port 60201. Sending cookies. Check SNMP counters.
TCP: request_sock_TCP: Possible SYN flooding on port 60201. Sending cookies. Check SNMP counters.
TCP: request_sock_TCP: Possible SYN flooding on port 60201. Sending cookies. Check SNMP counters.
TCP: request_sock_TCP: Possible SYN flooding on port 60202. Sending cookies. Check SNMP counters.
usb 5-1.1.2: USB disconnect, device number 8
ipheth 5-1.1.2:4.2: Apple iPhone USB Ethernet now disconnected